KSZ9021RL vs KSZ9021RLI Comparación
Comparación detallada lado a lado de KSZ9021RL por Microchip Technology y KSZ9021RLI por Microchip Technology. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Microchip Technology
KSZ9021RLI - Gigabit Ethernet PHY Transceiver, RGMII, 64-LQFP-EP | Microchip
KSZ9021RLI ✓ ActivoComparación de especificaciones
| Parámetro | KSZ9021RL | KSZ9021RLI |
|---|---|---|
| Marca | Microchip Technology | Microchip Technology |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Unknown | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $8,70 | $4,95 |
| Product Type | Single-port Gigabit Ethernet physical-layer transceiver | — |
| Supported Ethernet Speeds | 10 Mb/s, 100 Mb/s, and 1000 Mb/s | — |
| Supported Physical Standards | 10BASE-T, 100BASE-TX, and 1000BASE-T | — |
| Cable Medium | Standard CAT-5 unshielded twisted pair | — |
| MAC Interface | RGMII | — |
| Tensión de alimentación | 3.3 V | 3.135 V to 3.465 V (3.3V nominal) |
| Reference Clock Output | 125 MHz on CLK125_NDO | — |
| Auto-Negotiation Protocol | IEEE 802.3 Clause 28 | — |
| Encapsulado | 64-pin lead-free E-LQFP | 64-LQFP-EP (10x10 mm) with Exposed Pad |
| Recuento de pines | 64 pins | — |
| Tipo de montaje | Surface mount | Surface Mount |
| Maximum Link Speed | 1000 Mbps | — |
| Transceiver Configuration | Single port | — |
| Lead-Free Status | Lead-free | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Digital I/O Supply | [DATA_NEEDED: digital I/O supply voltage] | — |
| Analog Supply | [DATA_NEEDED: analog supply voltage] | — |
| Typical Current Consumption | [DATA_NEEDED: typical current consumption] | — |
| Junction Temperature | [DATA_NEEDED: junction temperature rating] | — |
| Función | — | 10/100/1000Base-T Ethernet PHY Transceiver |
| Number of Drivers/Receivers | — | 8/8 |
| Velocidad de datos | — | 10 Mbps / 100 Mbps / 1000 Mbps |
| Protocol | — | Gigabit Ethernet IEEE 802.3 |
| IC Interface Type | — | GMII, MII, RGMII |
| Core/Logic Voltage | — | 1.14 V to 1.26 V (internal LDO) / 3.3 V interface |
| Temperatura de funcionamiento | — | -40C to +85C (Industrial) |
| Auto-Negotiation | — | Yes (10/100/1000) |
| Auto-MDIX | — | Yes (HP Auto-MDIX) |
| Cable Diagnostics | — | LinkMD TDR-based |
| Energy Efficient Ethernet | — | IEEE 802.3az supported |
| Nivel MSL | — | [DATA_NEEDED: MSL Level] |
| Termination | — | On-chip 100-ohm |