LM2902PWRG3 vs LM2902KVQPWR Comparación
Comparación detallada lado a lado de LM2902PWRG3 por Texas Instruments y LM2902KVQPWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM2902PWRG3 | LM2902KVQPWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Amplifiers | 4 amplifiers | — |
| Amplifier Type | General-purpose | Quad general-purpose operational amplifier |
| Maximum Supply Voltage | 26 V | 30 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV | [DATA_NEEDED: input offset voltage] |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Supply Current Drain | 0.8 mA typical | — |
| Supply Configuration | Single supply or split supply | — |
| Encapsulado | 14-pin TSSOP (PW), 4.40 mm width | 14-pin TSSOP (PW) |
| Packaging | Tape and reel (TR) | — |
| Tipo de montaje | Surface mount | Surface mount |
| Lead Pitch | 0.65 mm | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40°C to 125°C |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | [DATA_NEEDED: open-loop gain] |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Estado RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Circuits | — | 4 circuits |
| ESD Protection | — | 2 kV |
| Número de pines | — | 14 pins |
| Tensión de alimentación | — | [DATA_NEEDED: recommended single-supply operating voltage range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Output Current | — | [DATA_NEEDED: output current] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |