LM2903DR vs LM2903VQDRQ1 Comparación
Comparación detallada lado a lado de LM2903DR por Texas Instruments y LM2903VQDRQ1 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ ActivoTexas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ ActivoComparación de especificaciones
| Parámetro | LM2903DR | LM2903VQDRQ1 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 2 V to 36 V | — |
| Tipo de salida | Open-collector | Open-collector |
| Response Time | 300 ns | — |
| Encapsulado | 8-pin SOIC | 8-pin SOIC (D) |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | -40 °C to +125 °C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Corriente en reposo | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | Approximately 1.3 µs |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 Grade 0 and Grade 1 |
| Supply Voltage Range, Single Supply | — | 2 V to 36 V |
| Supply Voltage Range, Dual Supply | — | ±1 V to ±18 V |
| Differential Input Voltage Range | — | Up to maximum-rated supply voltage |
| Common-Mode Input Voltage Range | — | Includes ground |
| Supply-Current Drain | — | 0.4 mA |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |