LM2903IMX vs LM2903DRG4 Comparación
Comparación detallada lado a lado de LM2903IMX por onsemi y LM2903DRG4 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM2903DRG4 - Dual 30V Open-Collector Comparator | Texas Instruments
LM2903DRG4 ✓ ActivoComparación de especificaciones
| Parámetro | LM2903IMX | LM2903DRG4 |
|---|---|---|
| Marca | onsemi | Texas Instruments |
| Categoría | Interface ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Comparison Channels | 2 channels | — |
| Single-Supply Operating Voltage | 2 V to 36 V | — |
| Dual-Supply Operating Voltage | ±1 V to ±18 V | — |
| Typical Response Time | 1.5 µs | — |
| Typical Supply Current | 800 µA | — |
| Tipo de salida | Open-collector | Open-collector |
| Input Common-Mode Range | Includes ground | — |
| Number of Inputs | 4 differential inputs | — |
| Número de salidas | 2 outputs | — |
| Encapsulado | 8-SOIC, 3.90 mm width | 8-pin SOIC |
| Tipo de montaje | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| Logic Compatibility | Compatible with TTL and CMOS logic | — |
| Single-Supply Comparison Near Ground | Supported | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Comparators | — | 2 |
| Supply Voltage Range, Single Supply | — | 2 V to 30 V |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range, Dual Supply | — | 2 V to 36 V total supply difference |
| Differential Input Voltage | — | ±38 V |
| Common-Mode Input Range | — | Includes ground |
| Propagation Delay | — | 1.3 us |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Output Logic Compatibility | — | TTL, MOS, and CMOS |
| Input Pins | — | 2 differential input pins per comparator |
| Output Pins | — | 2 open-collector output pins |
| Supply Pins | — | VCC and ground |
| Automotive Qualification | — | Not stated in the verified manufacturer information |
| REACH Status | — | [DATA_NEEDED: REACH status] |