LM293DRG4 vs LM293DG Comparación
Comparación detallada lado a lado de LM293DRG4 por Texas Instruments y LM293DG por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM293DRG4 | LM293DG |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Tipo de salida | Open-collector | Open-collector / open-drain |
| Supply Voltage Range, Single Supply | [DATA_NEEDED: single-supply operating voltage range] | — |
| Dual-Supply Total Voltage Difference | 2 V to 36 V | — |
| Common-Mode Input Range | Includes ground | Includes ground (single supply operation) |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage | — |
| Input Offset Voltage, Maximum | 9000 uV | — |
| Maximum Operating Temperature | 85 C | — |
| Output Compatibility | TTL, MOS, and CMOS compatible | CMOS, MOS, TTL, DTL, ECL |
| Encapsulado | 8-SOIC, 3.90 mm nominal width | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Tipo de montaje | Surface mount | Surface Mount |
| Shipping Configuration | Tape and reel | — |
| Industrial Grade | Yes | — |
| Estado RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Rango de temperatura de funcionamiento | — | -25 C to +85 C |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Corriente de alimentación | — | 400 microamps |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |