LT1030CDR vs MAX202CD Comparación
Comparación detallada lado a lado de LT1030CDR por Texas Instruments y MAX202CD por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LT1030CDR - Quad RS-232 Line Driver 14-SOIC | Texas Instruments (Tape & Reel)
LT1030CDR ✓ Activo
Comparación de especificaciones
| Parámetro | LT1030CDR | MAX202CD |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Line Driver | — |
| Number of Drivers/Receivers | 4 / 0 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage Range | ±5 V to ±15 V | 4.5 V to 5.5 V |
| Typical Supply Current | 500 µA | — |
| Shutdown Supply Current | 0 µA | — |
| Output Drive Current | 10 mA | — |
| Externally Applied Output Voltage Tolerance | ±30 V | — |
| Output Swing (positive rail) | Within 200 mV of V+ | — |
| Output Swing (negative rail) | Within 1 V of V- | — |
| Rango de temperatura de funcionamiento | 0 °C to 70 °C | — |
| Encapsulado | 14-SOIC (D) | 16-pin SOIC |
| Número de pines | 14 | — |
| Tipo de montaje | Surface Mount | Surface mount |
| Lead Finish | NiPdAu | — |
| Tipo de salida | 3-State (open when off) | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual RS-232 line driver and receiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| Velocidad de datos | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |