LT1039CJ vs MAX211IDB Comparación
Comparación detallada lado a lado de LT1039CJ por Analog Devices y MAX211IDB por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LT1039CJ | MAX211IDB |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Unknown | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $10,99 | $1,41 |
| Product Type | Triple EIA-232 line transceiver | RS-232 Line Driver/Receiver (Transceiver) |
| Number of Drivers | 3 | 4 |
| Number of Receivers | 3 | 5 |
| Tensión de alimentación | Up to ±15 V | — |
| Receiver Input Voltage | ±30 V | — |
| Driver Output Voltage | RS-232 levels; outputs can be driven to ±30 V without damage | — |
| Receiver Input Impedance | 30 kΩ nominal | — |
| Receiver Input Hysteresis | 0.4 V | — |
| Shutdown Output State | High impedance | — |
| Power-Off Output State | High impedance when V+ and V− are 0 V | — |
| Driver Logic Input | TTL logic input | — |
| Receiver Logic Output | TTL or CMOS compatible | — |
| Short Circuit Protection | Fully short-circuit protected outputs | — |
| Encapsulado | 18-pin DIP | SSOP-28 (DB) |
| Temperature Grade | [DATA_NEEDED: operating temperature range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Tipo de montaje | Through-hole | Surface Mount |
| Supplier Case | DIP18 | — |
| Supply Voltage (VCC) | — | 4.5 V to 5.5 V |
| Data Rate (Max) | — | 120 kbps |
| Driver Output Swing | — | ±9 V (typ) |
| ESD Protection (HBM, RS-232 pins) | — | ±15 kV |
| Supply Current (typ, no load) | — | 1.5 mA |
| Rango de temperatura de funcionamiento | — | -40 °C to +85 °C |
| Charge Pump Caps | — | 4 external 0.1 µF |
| Receiver Input Threshold | — | 0.8 V (low) / 2.4 V (high) |
| Receiver Hysteresis | — | 0.5 V (typ) |
| Standards Compliance | — | TIA/EIA-232-F |
| Input Logic Compatibility | — | TTL/CMOS |