MAX13487EESA+T vs THVD1550 Comparación
Comparación detallada lado a lado de MAX13487EESA+T por Analog Devices y THVD1550 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX13487EESA+T - 5V RS-485/RS-422 Transceiver | Maxim Integrated
MAX13487EESA+T ✓ ActivoComparación de especificaciones
| Parámetro | MAX13487EESA+T | THVD1550 |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | USB Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,00 | $1,05 |
| Product Type | Half-Duplex RS-485/RS-422 Transceiver | — |
| Direction Control | AutoDirection (automatic) | — |
| Tensión de alimentación | +5 V | 4.5 V to 5.5 V (5 V nominal) |
| Velocidad de datos | 500 kbps | — |
| Drivers / Receivers | 1 / 1 | — |
| Duplex Mode | Half | — |
| ESD Protection | +/-15 kV (HBM) | — |
| Hot-Swap Capability | Yes | — |
| Fail-Safe Receiver | Yes (short, open, idle) | — |
| Logic Pin Voltage Range (/SHDN, /RE, /DI) | -0.3 V to +6 V | — |
| Encapsulado | 8-SOIC (0.154 in / 3.90 mm width), NSOIC | 8-pin SOIC (D) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Corriente en reposo | [DATA_NEEDED: supply current] | — |
| Receiver Input Impedance | 1/8 unit load (256 transceivers on bus) | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| Reel Packaging | Tape and Reel (+T suffix) | — |
| Función | — | Transceiver |
| Protocol | — | RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Data Rate (max) | — | 50 Mbps |
| Rango de temperatura de funcionamiento | — | -40 C to +125 C |
| IEC 61000-4-2 ESD (Contact) | — | ±18 kV |
| HBM ESD | — | ±30 kV |
| IEC 61000-4-4 EFT | — | ±4 kV |
| Common-Mode Range | — | -7 V to +12 V |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Quiescent Supply Current | — | [DATA_NEEDED: ICC typical] |
| Standards Compliance | — | TIA/EIA-485A |
| RoHS | — | Compliant |