MAX1480AEPI+ vs MAX1480BCPI+ Comparación
Comparación detallada lado a lado de MAX1480AEPI+ por Analog Devices y MAX1480BCPI+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480AEPI+ ✓ ActivoAnalog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX1480AEPI+ | MAX1480BCPI+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Isolated RS-485/RS-422 transceiver | — |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Velocidad de datos | 250 kbps | 250 kbps |
| Supported Interfaces | RS-485 and RS-422 | — |
| Tensión de alimentación | +5 V on the logic side | — |
| Isolation Architecture | Electrically isolated | — |
| Encapsulado | 28-pin PDIP, 0.600 inch, 15.24 mm | 28-PDIP (0.600", 15.24 mm wide) |
| Estilo de montaje | Through-hole | — |
| Logic-Side Supply Architecture | Single +5 V supply powers both sides of the interface | — |
| Application | Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces | — |
| Manufacturer Family | MAX1480A/B/C | — |
| Available Package Configuration | 28-pin DIP | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage Rating | [DATA_NEEDED: isolation voltage rating] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 70 mV |
| Supply Voltage (Logic Side) | — | 5 V (single supply) |
| Isolation Voltage | — | 1000 Vrms (galvanic, transformer-based) |
| Tipo de montaje | — | Through-Hole |
| Temperatura de funcionamiento | — | -40C to +85C |
| Number of Nodes on Bus | — | Up to 32 transceivers |
| Slew Rate | — | Reduced (low-EMI drivers) |
| Construction | — | Hybrid microcircuit (CMOS + pulse transformer) |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free / halogen-free status] |