MAX1480BCPI+ vs MAX1480BEPI+ Comparación
Comparación detallada lado a lado de MAX1480BCPI+ por Analog Devices y MAX1480BEPI+ por Maxim Integrated. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX1480BCPI+ | MAX1480BEPI+ |
|---|---|---|
| Marca | Analog Devices | Maxim Integrated |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $24,10 | $0,00 |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Velocidad de datos | 250 kbps | 250 kb/s |
| Receiver Hysteresis | 70 mV | 70 mV |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| Encapsulado | 28-PDIP (0.600", 15.24 mm wide) | 28-pin PDIP |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | [DATA_NEEDED: isolation voltage rating] |
| Tipo de montaje | Through-Hole | Through-hole |
| Temperatura de funcionamiento | -40C to +85C | 0 °C to +70 °C |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| Estado RoHS | Compliant | — |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Complete electrically isolated RS-485/RS-422 data interface |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Protocols | — | RS-422 and RS-485 |
| Isolation | — | Electrically isolated |
| Driver Slew Rate | — | Reduced-slew-rate driver |
| Supply Architecture | — | Single +5 V supply on logic side powers both sides |
| Encapsulado / Carcasa | — | 28-DIP (0.600 inch, 15.24 mm) |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |