MAX14882AWE+ vs MAX14852GWE+ Comparación
Comparación detallada lado a lado de MAX14882AWE+ por Analog Devices y MAX14852GWE+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ ActivoAnalog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX14882AWE+ | MAX14852GWE+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | USB Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $6,18 | $7,25 |
| Función | Isolated High-Speed CAN Transceiver | Transceiver |
| Protocol | ISO 11898-2 CAN | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Velocidad de datos | up to 1 Mbps | — |
| Galvanic Isolation Voltage | 5000 VRMS (60s) | — |
| VDDA Supply Voltage (Controller-side) | 3.0 V to 5.5 V | — |
| VDDB Supply Voltage (Bus-side) | 4.5 V to 5.5 V | — |
| Receiver Common-Mode Range | -25 V to +25 V | — |
| CANH/CANL Fault Tolerance | ±54 V | — |
| ESD Protection (Bus-side, HBM) | ±15 kV | — |
| Integrated Transformer Driver | Yes | — |
| Auxiliary LDO Output Current | 130 mA internal / 300 mA max | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | — |
| Encapsulado | 16-pin Wide SOIC (W SOIC) | 16-pin WSOIC (7.50 mm body width) |
| Creepage and Clearance | 8 mm | — |
| Estado RoHS | Compliant | Compliant |
| Duplex | — | Full |
| Data Rate (low-speed mode) | — | 500 kbps |
| Data Rate (high-speed mode) | — | 25 Mbps |
| Galvanic Isolation Rating | — | 2.75 kVRMS (60 s) |
| Supply Voltage (VVDD / VBUS) | — | 1.71 V to 5.5 V |
| ESD Protection (HBM, bus pins) | — | ±35 kV |
| Temperatura de funcionamiento | — | -40 °C to +105 °C |
| Tipo de montaje | — | Surface Mount |
| Fail-safe Receiver | — | Yes |
| Hot-swap Tolerant | — | Yes |
| Isolation Technology | — | Maxim iso-loop (integrated transformer driver) |