MAX232D vs MAX232ECD Comparación
Comparación detallada lado a lado de MAX232D por Texas Instruments y MAX232ECD por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MAX232D | MAX232ECD |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,62 | $0,65 |
| Función | Dual RS-232 line driver/receiver (2/2 transceiver, full) | Dual RS-232 Driver/Receiver (Transceiver) |
| Velocidad de datos | 120 kbps | — |
| Supply Voltage (Vcc) | 4.5 V to 5.5 V | — |
| Corriente de alimentación | 8 mA typical | — |
| Receiver Input Levels | +/-30 V tolerant | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Charge Pump Capacitors Required | 4 external (typically 1 uF) | — |
| Generated RS-232 Rails | Approx. +/-9 V to +/-10 V from internal charge pump | — |
| Compliance | TIA/EIA-232-F, ITU V.28 | — |
| ESD Protection (RS-232 pins) | [DATA_NEEDED: datasheet ESD figure] | IEC61000-4-2: ±15 kV air, ±8 kV contact |
| Temperatura de funcionamiento | 0 C to +70 C (commercial grade) | 0 °C to +70 °C (commercial, C suffix) |
| Encapsulado | SOIC-16 (D) | 16-pin SOIC (D) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes / [DATA_NEEDED: halogen-free] | — |
| Interchangeable With | Maxim MAX232 (industry-standard die) | — |
| Data Rate (max) | — | 120 kbit/s |
| Tensión de alimentación | — | 4.5 V to 5.5 V (single 5 V supply) |
| RS-232 Output Voltage Swing | — | ±5 V to ±10 V (from charge pump) |
| Receiver Input Voltage Range | — | ±30 V |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Current (no load, typ) | — | 8 mA typical |
| Charge-Pump Capacitors | — | 4 x 1.0 µF external |
| Nivel MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |