MAX232IDWRE4 vs MAX232EESE+T Comparación
Comparación detallada lado a lado de MAX232IDWRE4 por Texas Instruments y MAX232EESE+T por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MAX232IDWRE4 | MAX232EESE+T |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | Dual EIA-232 driver and receiver | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Tensión de alimentación | 5 V | +5 V |
| Maximum Data Rate | 120 kbit/s | — |
| RS-232 Input Voltage Tolerance | ±30 V | — |
| Charge-Pump Capacitor Value | 1.0 µF | — |
| Typical Supply Current | 8 mA | — |
| ESD Protection | 2000 V human-body model | ±15 kV human body model |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 16-pin SOIC | 16-pin SOIC, 3.90 mm width |
| Recuento de pines | 16 pins | — |
| Tipo de montaje | Surface mount | Surface mount |
| Transceiver Configuration | 2 transmit and 2 receive channels | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | ROHS3 compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | RS-232 transceiver |
| Transmitter Channels | — | 2 |
| Receiver Channels | — | 2 |
| Duplex Mode | — | Full duplex |
| Velocidad de datos | — | Up to 120 kbps |
| Standards Compatibility | — | EIA/TIA-232E and CCITT V.28 |
| Interface Protocol | — | RS-232 |
| Moisture Sensitivity Level | — | MSL 1 (unlimited floor life) |
| Estado del ciclo de vida | — | Active |
| Operating Voltage | — | [DATA_NEEDED: operating voltage range] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| Package Dimensions | — | [DATA_NEEDED: package dimensions] |