MAX3380EEUP+T vs MAX3380EEUP+ Comparación
Comparación detallada lado a lado de MAX3380EEUP+T por Analog Devices y MAX3380EEUP+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MAX3380EEUP+T | MAX3380EEUP+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-232 transceiver | — |
| Transmitter Count | 2 transmitters | — |
| Receiver Count | 2 receivers | — |
| Supply Voltage Range | +2.35V to +5.5V | +2.35 V to +5.5 V |
| Maximum Data Rate | 460 kbps | 460 kbps |
| Logic Reference Voltage | Down to +1.65V | — |
| ESD Protection | ±15 kV on I/O and logic pins | — |
| Communication Standard | EIA/TIA-232 and V.28/V.24 | V.28/V.24 |
| Duplex Operation | Full duplex | — |
| Package Type | 20-pin TSSOP | — |
| Tipo de montaje | Surface mount | Surface mount |
| Corriente en reposo | 1 µA | — |
| I/O Protection | ±15 kV ESD protected | — |
| Logic Pin Protection | ±15 kV ESD protected | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Device Type | — | RS-232 transceiver |
| Number of Transmitters | — | 2 |
| Number of Receivers | — | 2 |
| RS-232 ESD Protection | — | 15 kV |
| Logic Pin ESD Protection | — | 15 kV |
| Interface Standard | — | EIA/TIA-232 |
| Transmitter Architecture | — | Low-dropout output stage |
| Charge-Pump Architecture | — | Dual charge pump |
| Transmitter Output Levels | — | RS-232-compatible levels from +2.35 V to +5.5 V supply |
| Encapsulado | — | 20-pin TSSOP |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Transmitter Output Current | — | [DATA_NEEDED: transmitter output current] |