MAX485CSA+ vs MAX485ESA+ Comparación

Comparación detallada lado a lado de MAX485CSA+ por Analog Devices y MAX485ESA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Analog Devices
MAX485ESA+ MAX485ESA+ - 5V RS-485/RS-422 Transceiver, 2.5Mbps, SOIC-8

MAX485ESA+ - 5V RS-485/RS-422 Transceiver, 2.5Mbps, SOIC-8

MAX485ESA+ ✓ Activo

Comparación de especificaciones

Parámetro MAX485CSA+ MAX485ESA+
Marca Analog Devices Analog Devices
Categoría Interface ICs Interface ICs
Estado del ciclo de vida Activo Activo
Transceiver Configuration 1 driver and 1 receiver —
Communication Standards RS-485 and RS-422 —
Duplex Mode Half-duplex —
Maximum Data Rate 2.5Mbps —
Driver Slew Rate Unlimited for the MAX485 family —
Device Type Low-power differential transceiver —
Encapsulado 8-pin SOIC 8-SOIC (SOIC-8)
Recuento de pines 8 pins —
Tipo de montaje Surface mount Surface Mount
Tensión de alimentación [DATA_NEEDED: supply voltage range] 4.75 V to 5.25 V (5 V nominal)
Corriente de alimentación [DATA_NEEDED: unloaded and loaded supply current] —
Rango de temperatura de funcionamiento [DATA_NEEDED: MAX485CSA operating temperature range] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Differential Input Sensitivity [DATA_NEEDED: receiver differential input sensitivity] —
Driver Output Current [DATA_NEEDED: driver output current] —
Short-Circuit Protection [DATA_NEEDED: driver short-circuit protection duration] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Función — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Velocidad de datos — 2.5 Mbps
Supply Current (unloaded) — 120 µA to 500 µA
Receiver Hysteresis — 70 mV (typ)
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold (V_TH) — -0.2 V min / +0.2 V max
ESD Protection (HBM, driver output) — ±15 kV (per datasheet)
Unit Load — 1/8 (up to 256 transceivers on bus)
Temperatura de funcionamiento — -40 °C to +85 °C
Estado RoHS — Compliant (per Maxim/ADI datasheet suffix '+')

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización