MAX485ECSA+ vs SP485ECN-L Comparación
Comparación detallada lado a lado de MAX485ECSA+ por Analog Devices y SP485ECN-L por MaxLinear. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ ActivoComparación de especificaciones
| Parámetro | MAX485ECSA+ | SP485ECN-L |
|---|---|---|
| Marca | Analog Devices | MaxLinear |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Half-duplex RS-485/RS-422 line transceiver | RS-422/RS-485 half-duplex line transceiver |
| Transceiver Configuration | 1 driver, 1 receiver | — |
| Technology | CMOS | BiCMOS |
| Maximum Data Rate | 2.5 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Interface Standard | RS-485 and RS-422 | — |
| Driver Output Protection | 15 kV ESD | — |
| Receiver Input Protection | 15 kV ESD | — |
| Driver Output Type | Slew-rate-limited | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Bus Nodes | [DATA_NEEDED: maximum bus nodes] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Encapsulado | 8-SOIC (0.150 inch, MS-012A) | 8-pin SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| Tensión de alimentación de funcionamiento | [DATA_NEEDED: operating supply voltage] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Tensión de alimentación | — | 5 V |
| Protocol Support | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Velocidad de datos | — | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps |
| Package Width | — | 0.154 in (3.90 mm) |
| Packaging | — | Tape and reel |
| Human Body Model ESD Tolerance | — | Over ±15 kV |
| IEC 61000-4-2 Air Discharge ESD Tolerance | — | Over ±15 kV |
| Corriente de alimentación | — | [DATA_NEEDED: typical and maximum supply current] |
| Differential Input Voltage | — | [DATA_NEEDED: receiver input voltage range] |
| Output Current | — | [DATA_NEEDED: driver output current] |
| Shutdown Support | — | Not stated for SP485ECN-L in the verified data |
| Lead-Free Status | — | Lead-free product marking is stated in the verified search data |