MAX485EPA+ vs SN75176BP Comparación
Comparación detallada lado a lado de MAX485EPA+ por Analog Devices y SN75176BP por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX485EPA+ - 2.5Mbps RS-485/RS-422 Transceiver | Maxim Integrated
MAX485EPA+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX485EPA+ | SN75176BP |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 transceiver | Differential bus transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 2.5 Mbps | [DATA_NEEDED: maximum data rate] |
| Slew Rate | Not limited | — |
| Driver Protection | Short-circuit current limited and protected | — |
| Encapsulado | 8-pin PDIP | 8-pin PDIP (P) |
| Tipo de montaje | Through-hole | Through-hole |
| Interface Standards | RS-422 and RS-485 | — |
| Driver Output | Differential | Three-state driver |
| Receiver Input | Differential | — |
| Power Class | Low-power transceiver | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Voltage | [DATA_NEEDED: common-mode voltage range] | — |
| ESD Protection | [DATA_NEEDED: ESD rating] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Supported Standards | — | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11, ITU X.27 |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Bus Modes | — | RS-422 and RS-485 |
| Bus Topology | — | Multipoint transmission |
| Receiver Output | — | Three-state receiver |
| Tensión de alimentación | — | [DATA_NEEDED: supply voltage] |
| Logic Input Voltage | — | [DATA_NEEDED: logic input voltage] |
| Driver Differential Output Voltage | — | [DATA_NEEDED: driver differential output voltage] |
| Receiver Differential Input Voltage | — | [DATA_NEEDED: receiver differential input voltage] |
| Maximum Bus Length | — | [DATA_NEEDED: maximum bus length] |
| Maximum Node Count | — | [DATA_NEEDED: maximum node count] |
| Rango de temperatura de funcionamiento | — | 0°C to 70°C |