MAX485ESA+T vs MAX487ESA+ Comparación
Comparación detallada lado a lado de MAX485ESA+T por Analog Devices y MAX487ESA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX487ESA+ - Low-Power Slew-Rate-Limited RS-485/RS-422 Transceiver | Analog Devices
MAX487ESA+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX485ESA+T | MAX487ESA+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 transceiver | — |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Operating Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Slew Rate Limiting | Not limited | — |
| Driver Short-Circuit Protection | Current limited and protected | — |
| Supported Standards | RS-485 and RS-422 | — |
| Encapsulado | 8-pin SOIC | 8-SOIC (NS) |
| Package Pin Count | 8 pins | — |
| Tipo de montaje | Surface mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Estado RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Función | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Tensión de alimentación | — | 4.75 V to 5.25 V |
| Velocidad de datos | — | 250 kbps |
| Supply Current (unloaded/loaded) | — | 120 µA to 500 µA |
| Shutdown Supply Current | — | 0.1 µA (typical) |
| ESD Protection (HBM, bus pins) | — | ±15 kV |
| Slew-Rate Limited | — | Yes |
| Temperatura de funcionamiento | — | -40 °C to +85 °C |
| Recuento de pines | — | 8 |
| Lead-Free / RoHS | — | Lead-free, RoHS compliant |