MK2308S-1H vs MK2308S-1HI Comparación
Comparación detallada lado a lado de MK2308S-1H por Renesas Electronics y MK2308S-1HI por Renesas Electronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Renesas Electronics
MK2308S-1HI - 133MHz Zero Delay Buffer | Renesas | Clock IC
MK2308S-1HI ✓ ActivoComparación de especificaciones
| Parámetro | MK2308S-1H | MK2308S-1HI |
|---|---|---|
| Marca | Renesas Electronics | Renesas Electronics |
| Categoría | Clock & Timing | Clock & Timing |
| Estado del ciclo de vida | Unknown | Activo |
| Device Type | PLL-based zero-delay buffer | Zero Delay Buffer IC |
| Maximum Frequency | 133 MHz | 133 MHz |
| Número de salidas | 8 outputs | 8 |
| Supply Voltage Range | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Output Skew | 200 ps | 200 ps |
| Output Interface | CMOS | — |
| PLL | Yes, with bypass | Yes, with bypass |
| Input Type | Clock | — |
| Number of Circuits | 1 | 1 |
| Temperatura de funcionamiento | 0°C to 70°C | — |
| Encapsulado | 16-SOIC, 3.90 mm width | 16-SOIC (0.154 inch, 3.90 mm width) |
| Tipo de montaje | Surface mount | Surface Mount |
| Output Control | Tri-state or stop-at-a-low mode | Tri-state and stop-clock modes |
| Decoupling Requirement | 0.01 uF near VDD and GND pins | — |
| Phase Noise | Low phase noise | Low phase noise |
| Clock Distribution | 8 low-skew outputs | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Rango de temperatura de funcionamiento | — | -40°C to +85°C |
| Bus Interface | — | CMOS |
| Input Clock | — | Clock |
| Tipo de salida | — | CMOS-compatible |
| Jitter | — | Low jitter |
| Absolute Maximum Input Voltage | — | [DATA_NEEDED: absolute maximum input voltage] |
| Output High and Low Levels | — | [DATA_NEEDED: output high-level and low-level voltages] |
| Input Clock Tolerance | — | [DATA_NEEDED: input clock frequency tolerance] |
| Jitter Specification | — | [DATA_NEEDED: RMS or peak-to-peak jitter] |
| Power Consumption | — | [DATA_NEEDED: typical and maximum supply current] |