MPX2010GS vs MPX2010DP Comparación
Comparación detallada lado a lado de MPX2010GS por NXP Semiconductors y MPX2010DP por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MPX2010GS | MPX2010DP |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Obsolete | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $15,95 | $8,50 |
| Pressure Type | Vented Gauge | — |
| Operating Pressure | 1.45 PSI (10 kPa) | — |
| Maximum Pressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Tipo de salida | Wheatstone Bridge (analog voltage) | Analog voltage, Wheatstone bridge (mV level) |
| Tensión de salida | 0 mV to 25 mV at 10 V excitation | — |
| Tensión de alimentación | 10 V to 16 V | 10 V DC typical (max 16 V) |
| Accuracy | +/-1% (per data brief) | — |
| Port Size | Male - 0.19" (4.93 mm) Tube | — |
| Port Style | Barbed, single vented-gauge port | — |
| Encapsulado / Carcasa | 4-SIP Module | — |
| Tipo de montaje | Through-Hole | — |
| Temperatura de funcionamiento | -40C to +125C (per MPX2010 series datasheet) | -40 °C to +125 °C |
| Technology | Piezoresistive (silicon diaphragm) | Piezoresistive (silicon strain gauge bridge) |
| Compensation | On-chip temperature compensated and calibrated | — |
| Estado RoHS | [DATA_NEEDED: RoHS status of this lot] | Compliant |
| Tipo de sensor | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |