MPX4105A vs MPX4115A Comparación
Comparación detallada lado a lado de MPX4105A por NXP Semiconductors y MPX4115A por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MPX4105A - 15-105kPa Absolute Pressure Sensor | NXP | MAP Sensor
MPX4105A ✓ Activo
Comparación de especificaciones
| Parámetro | MPX4105A | MPX4115A |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $10,40 | $8,20 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 105 kPa (2.18 PSI to 15.23 PSI) | — |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Rango de tensión de salida | 0.3 V to 4.9 V | 0.2 V to 4.8 V |
| Supply Voltage (VCC) | 4.85 V to 5.35 V (5 V typical) | — |
| Tipo de salida | Analog voltage, ratiometric | Analog Voltage |
| Accuracy | 1.5% (0C to 85C, typical) | ±1.5% (0°C to +85°C) |
| Temperatura de funcionamiento | -40C to +125C | -40°C to +125°C |
| Encapsulado | 6-SIP Module (through-hole) | 6-SIP Module (Unibody) |
| Port Size | Female, 3.4544 mm (0.136 in) barbed | — |
| Technology | Piezoresistive silicon, on-chip signal conditioned | — |
| Tipo de montaje | Through Hole | Through-Hole |
| Signal Conditioning | On-chip, temperature compensated, laser trimmed | On-chip bipolar op-amp + thin-film resistor network |
| Estado RoHS | Compliant | Compliant |
| Applications | Manifold Absolute Pressure (MAP), engine control, barometric, HVAC | — |
| Tipo de sensor | — | Absolute Pressure Sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Tensión de alimentación | — | 5.1 V typical |
| Port Type | — | Single port, axial |
| Media Compatibility | — | Dry air (non-corrosive gas) |
| Calibration | — | Factory calibrated, no external compensation required |
| Nivel MSL | — | 1 |