MPX5010D vs MPX5050D Comparación
Comparación detallada lado a lado de MPX5010D por NXP Semiconductors y MPX5050D por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MPX5010D - 10kPa Differential Pressure Sensor | NXP Semiconductors
MPX5010D ✓ ActivoNXP Semiconductors
MPX5050D - 50kPa Differential Pressure Sensor, 5V, SIP-6 | NXP
MPX5050D ✗ Fin de vidaComparación de especificaciones
| Parámetro | MPX5010D | MPX5050D |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Fin de vida |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $8,25 | $9,85 |
| Manufacturer | NXP Semiconductors | — |
| Pressure Type | Differential | — |
| Operating Pressure | 1.45 PSI (10 kPa) max | — |
| Tipo de salida | Analog Voltage | Analog, Ratiometric |
| Rango de tensión de salida | 0.2 V to 4.7 V | — |
| Tensión de alimentación | 4.75 V to 5.25 V | 4.75 V to 5.25 V (5 V typical) |
| Port Size | Dual axial port (Differential) | — |
| Accuracy | [DATA_NEEDED: %FS] | — |
| Temperatura de funcionamiento | 0C to +85C (industrial-grade derivative supported to 40C to +125C) | -40 °C to +125 °C |
| Encapsulado / Carcasa | 6-SIP Module (Case 867-08) | — |
| Tipo de montaje | Through-hole module | Through-Hole (SIP) |
| Sensor Technology | Piezoresistive MEMS | — |
| Signal Conditioning | On-chip, temperature compensated and calibrated | — |
| Corriente de alimentación | [DATA_NEEDED: mA] | 7 mA (typical) |
| Response Time | [DATA_NEEDED: ms] | 1 ms (typical) |
| Estado RoHS | [DATA_NEEDED: verified per datasheet] | — |
| Media Compatibility | Dry non-corrosive gases (air-referenced diaphragm) | Dry, non-corrosive, non-ionic gases |
| Tipo de sensor | — | Differential Pressure Sensor |
| Pressure Range | — | 0 kPa to 50 kPa (0 to 7.25 PSI) |
| Tensión de salida | — | 0.2 V to 4.7 V |
| Linearity | — | ±1.5% (over 0 to 50 kPa) |
| Compensated Temperature | — | 0 °C to +85 °C |
| Port Type | — | Dual axial ports (P1 high, P2 low) |
| Pressure Port Size | — | 1/16 inch (4.93 mm) tubing |
| Encapsulado | — | 6-SIP Module (Unibody) |
| Technology | — | Piezoresistive MEMS with ASIC conditioning |
| Output Span | — | 4.5 V (typical at 5 V supply) |