NE5532AD vs NE5532PE4 Comparación
Comparación detallada lado a lado de NE5532AD por Texas Instruments y NE5532PE4 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532PE4 - Dual 30V 10MHz Low-Noise Op Amp | Texas Instruments
NE5532PE4 ✓ ActivoComparación de especificaciones
| Parámetro | NE5532AD | NE5532PE4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Dual operational amplifier | Operational amplifier |
| Number of Circuits | 2 circuits | 2 circuits |
| Tensión de alimentación | 30 V | — |
| Typical Unity-Gain Bandwidth | 10 MHz | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| High DC Voltage Gain | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical with ±18 V supply | — |
| Slew Rate | 600 V/µs typical | 9 V/µs typical |
| Gain Compensation | Internally compensated for unity-gain operation | — |
| Encapsulado | 8-pin SOIC | 8-DIP, 0.300 in, 7.62 mm |
| Tipo de montaje | Surface mount | Through-hole |
| Número de pines | 8 pins | — |
| Input Protection | Input-protection diodes | — |
| Output Protection | Output short-circuit protection | — |
| Primary Application | Audio applications | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Yes |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Architecture | — | Voltage-feedback |
| Application Category | — | Audio |
| Total Supply Voltage | — | 30 V maximum |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Input Bias Current | — | 800 nA typical |
| Offset Voltage | — | 500 µV typical |
| Estado del ciclo de vida | — | Active |