NE5532DR vs NE5532P Comparación
Comparación detallada lado a lado de NE5532DR por Texas Instruments y NE5532P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ Activo
Comparación de especificaciones
| Parámetro | NE5532DR | NE5532P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Dual low-noise operational amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | 9 V/µs typical |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Rango de temperatura de funcionamiento | 0 °C to +70 °C for NE5532x | — |
| Encapsulado | 8-pin SOIC | 8-pin PDIP (P) |
| Tipo de montaje | Surface Mount | Through hole |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | — |
| Manufacturer | Texas Instruments | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range | — | ±5 V to ±15 V |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Input Offset Voltage | — | 4000 µV maximum |
| Process Technology | — | Bipolar |
| Temperatura de funcionamiento | — | 0 °C to 70 °C |
| Primary Application | — | Audio |