NE5532PSR vs NE5532ADR Comparación
Comparación detallada lado a lado de NE5532PSR por Texas Instruments y NE5532ADR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532PSR - Dual 10 MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532PSR ✓ ActivoTexas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActivoComparación de especificaciones
| Parámetro | NE5532PSR | NE5532ADR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Amplifier Circuits | 2 circuits | — |
| Amplifier Type | General-purpose operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 9 V/µs typical | 9 V/µs |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V supply and 600 Ω load | — |
| Tensión de alimentación | 15 V | — |
| Input Bias Current | 1 µA | [DATA_NEEDED: input bias current] |
| Temperatura de funcionamiento | 0°C to 70°C | — |
| Package Type | 8-SO plastic package | — |
| Número de pines | 8 pins | — |
| Tipo de montaje | Surface mount | Surface mount |
| Supply Configuration | Dual supply supported; ±18 V test condition stated | — |
| Compensation | Internally compensated for unity gain | — |
| Input Protection | Input-protection diodes | — |
| Output Protection | Output short-circuit protection | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Dual low-noise operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Rango de temperatura de funcionamiento | — | 0°C to +70°C for NE5532x |
| Extended-Temperature Variant | — | -40°C to +85°C for SA5532x |
| Encapsulado | — | 8-pin SOIC |
| Tipo de salida | — | Rail-to-rail output |
| Input Voltage | — | [DATA_NEEDED: input voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Voltage Noise Density | — | [DATA_NEEDED: voltage noise density] |
| Current Noise Density | — | [DATA_NEEDED: current noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |