NE5534DRE4 vs NE5534P Comparación
Comparación detallada lado a lado de NE5534DRE4 por Texas Instruments y NE5534P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5534DRE4 - Single Low-Noise Op Amp 10MHz | Texas Instruments
NE5534DRE4 ✓ Activo
Comparación de especificaciones
| Parámetro | NE5534DRE4 | NE5534P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Low-Noise Operational Amplifier | Single operational amplifier |
| Number of Channels | 1 Circuit | — |
| Unity-Gain Bandwidth | 10 MHz (typical) | 10 MHz typical |
| Slew Rate | 13 V/μs (typical) | 13 V/µs typical |
| Input Voltage Noise Density | 3.5 nV/√Hz (typical) | — |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typical) | — |
| DC Open-Loop Voltage Gain | 100 V/mV (typical) | — |
| Peak-to-Peak Output Voltage Swing | 32 V (typical, ±18V supply, 600 Ω load) | — |
| Supply Voltage Range (Dual) | ±3 V to ±20 V | — |
| Supply Voltage Range (Single) | 6 V to 40 V | — |
| Rango de temperatura de funcionamiento | -55 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 8-pin SOIC (D) | 8-pin PDIP |
| Tipo de montaje | Surface Mount | Through-hole |
| Packaging | Tape and Reel (DRE4 suffix) | — |
| Estado RoHS | Compliant | unknown |
| Tensión de alimentación | — | 30 V maximum |
| Equivalent Input Noise Voltage | — | 3.5 nV/√Hz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| DC Voltage Gain | — | 100 V/V typical |
| Output Voltage Swing | — | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω |
| Number of Amplifiers | — | 1 |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Lead-Free Status | — | unknown |
| Halogen-Free Status | — | unknown |
| Conflict Minerals Status | — | unknown |