OPA130UA vs AD8605ARZ Comparación
Comparación detallada lado a lado de OPA130UA por Texas Instruments y AD8605ARZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
OPA130UA - 1 MHz FET-Input Op Amp, 20 pA Bias, 530 uA Iq | Texas Instruments
OPA130UA ✓ ActivoComparación de especificaciones
| Parámetro | OPA130UA | AD8605ARZ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Single, General Purpose, FET-Input Operational Amplifier | Precision CMOS |
| Number of Circuits | 1 | 1 |
| Gain-Bandwidth Product | 1 MHz | — |
| Slew Rate | 2 V/us | [DATA_NEEDED: slew rate] |
| Input Bias Current | 20 pA typical | 1 pA |
| Corriente en reposo | 530 uA typical | — |
| Supply Voltage Range | +/-2.25 V to +/-18 V | 2.7 V to 5.5 V |
| Encapsulado | 8-pin SOIC (D), surface mount | SOIC-8 |
| Tipo de montaje | Surface Mount | Surface Mount |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing / Rail-to-Rail Output | [DATA_NEEDED: output swing] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Series | OPAx130 (OPA130 / OPA2130 / OPA4130) | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant (Pb-free Z suffix) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Tipo de salida | — | Rail-to-Rail |
| Input Type | — | Rail-to-Rail |
| Maximum Input Offset Voltage | — | 65 µV |
| Input Voltage Noise Density | — | 7 nV/√Hz |
| Input Current Noise Density | — | [DATA_NEEDED: input current noise density] |
| Gain Bandwidth Product | — | 10 MHz |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current per amplifier] |
| Trim Technique | — | DigiTrim® |