OPA130UA vs OPA137U Comparación
Comparación detallada lado a lado de OPA130UA por Texas Instruments y OPA137U por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
OPA130UA - 1 MHz FET-Input Op Amp, 20 pA Bias, 530 uA Iq | Texas Instruments
OPA130UA ✓ ActivoComparación de especificaciones
| Parámetro | OPA130UA | OPA137U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Unknown |
| Amplifier Type | Single, General Purpose, FET-Input Operational Amplifier | Single voltage-feedback operational amplifier |
| Number of Circuits | 1 | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Slew Rate | 2 V/us | 3.5 V/µs |
| Input Bias Current | 20 pA typical | ±10 pA |
| Corriente en reposo | 530 uA typical | 120 µA per channel |
| Supply Voltage Range | +/-2.25 V to +/-18 V | [DATA_NEEDED: minimum and maximum operating supply voltage] |
| Encapsulado | 8-pin SOIC (D), surface mount | 8-pin SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing / Rail-to-Rail Output | [DATA_NEEDED: output swing] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Series | OPAx130 (OPA130 / OPA2130 / OPA4130) | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Input Architecture | — | JFET input |
| Maximum Supply Voltage | — | 36 V |
| Open-Loop Gain | — | 145 dB |
| Input Common-Mode Range | — | Rail-to-rail input to V+ |
| Channel Count | — | 1 channel |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Short-Circuit Current | — | [DATA_NEEDED: output short-circuit current] |