OPA137PA vs OPA134PA Comparación
Comparación detallada lado a lado de OPA137PA por Texas Instruments y OPA134PA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | OPA137PA | OPA134PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Single J-FET-input operational amplifier | — |
| Number of Amplifier Channels | 1 channel | — |
| Maximum Supply Voltage | 36 V | — |
| Nominal Total Supply Voltage | ±18 V | — |
| Gain-Bandwidth Product | 1 MHz | 8 MHz |
| Open-Loop Gain | 145 dB | 600 |
| Input Bias Current | ±10 pA | 50 pA |
| Corriente en reposo | 120 µA per channel | — |
| Slew Rate | 3.5 V/µs | 20 V/µs |
| Maximum Input Offset Voltage | 15 mV | — |
| Input Common-Mode Range | Rail-to-rail input to V+ | — |
| Encapsulado | 8-pin PDIP | 8-pin PDIP |
| Package Type | Through-hole PDIP | — |
| Product Family | MicroAmplifier | SoundPlus high-performance audio operational amplifier |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Corriente de alimentación | [DATA_NEEDED: maximum supply current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | 8 nV/√Hz |
| Output Current | [DATA_NEEDED: output current] | — |
| Short-Circuit Current | [DATA_NEEDED: short-circuit current] | — |
| Nivel MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Operational Amplifier Type | — | Single high-performance audio operational amplifier |
| Channel Count | — | 1 circuit |
| Total Harmonic Distortion | — | 0.00008% |
| Supply Voltage Range | — | ±18 V |
| Input Stage | — | True FET input |
| Tipo de montaje | — | Through-hole |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |