OPA2132U vs OPA132U Comparación
Comparación detallada lado a lado de OPA2132U por Texas Instruments y OPA132U por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
OPA132U - 8MHz FET-Input Op Amp, Single, 8-SOIC | Texas Instruments
OPA132U ✓ ActivoComparación de especificaciones
| Parámetro | OPA2132U | OPA132U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Dual operational amplifier | FET-Input Operational Amplifier |
| Input Stage | FET input | — |
| Number of Amplifiers | 2 circuits | — |
| Gain-Bandwidth Product | 8 MHz | — |
| Maximum Input Bias Current | 5 pA | — |
| Slew Rate | 20 V/µs | 20 V/µs |
| Total Harmonic Distortion Plus Noise | 0.00008% | — |
| Open-Loop Gain | 130 dB at a 600 Ω load | — |
| Supply Voltage Range | ±18 V | — |
| Maximum Offset Voltage | 500 µV | — |
| Encapsulado | 8-pin SOIC | 8-pin SOIC (D) |
| Tipo de montaje | Surface mount | Surface Mount |
| Application Category | General-purpose, audio, data-acquisition, and communications | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Corriente de alimentación | [DATA_NEEDED: typical supply current] | — |
| Input Voltage Noise Density | [DATA_NEEDED: input voltage noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Number of Channels | — | 1 (Single) |
| Gain Bandwidth Product | — | 8 MHz |
| Input Bias Current (max) | — | 50 pA |
| Input Offset Voltage (max) | — | 500 µV |
| Open-Loop Gain (600 Ω load) | — | 130 dB |
| Total Harmonic Distortion | — | 0.00008 % |
| Supply Voltage Range (Dual) | — | ±2.25 V to ±18 V |
| Supply Voltage Range (Single) | — | 4.5 V to 36 V |
| Tipo de salida | — | Rail-to-Rail (approaching rails on 600 Ω) |
| Nivel MSL | — | 3 (168 hours) |
| Estado RoHS | — | Compliant |
| Series | — | SoundPlus, OPAx132 |