PCA9535DBR vs PCA9535DB Comparación
Comparación detallada lado a lado de PCA9535DBR por Texas Instruments y PCA9535DB por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | PCA9535DBR | PCA9535DB |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Fin de vida | Activo |
| Number of I/O Lines | 16 lines | — |
| Interfaz | I2C and SMBus | I2C/SMBus |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Maximum Bus Clock Frequency | 400 kHz | — |
| Interrupt Output | Yes | Yes |
| Configuration Registers | Yes | Yes |
| Maximum Standby Current | 1 uA | — |
| Encapsulado | 24-SSOP (0.209 inch, 5.30 mm width) | 24-SSOP (0.209, 5.30 mm width) |
| Tipo de montaje | Surface mount | — |
| Packaging | Cut Tape | Tube |
| I/O Port Organization | Two 8-bit ports, 16 I/O total | — |
| Low-Power Operation | Low standby-current operation | — |
| Host GPIO Reduction | 16 host I/O lines | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Output Current per Line | [DATA_NEEDED: output current per line] | — |
| Input and Output Port Current | [DATA_NEEDED: input and output port current] | — |
| I2C Address Configuration | [DATA_NEEDED: I2C address configuration details] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| Device Type | — | Remote 16-bit I2C/SMBus low-power I/O expander |
| Number of I/O | — | 16 |
| I2C/SMBus Clock Frequency | — | 400 kHz |
| I/O Direction Control | — | Programmable input/output |
| Standby Current Consumption | — | 1 uA maximum |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| I/O Voltage Levels | — | [DATA_NEEDED: I/O voltage levels] |
| I/O Output Current | — | [DATA_NEEDED: output current] |
| Input Hysteresis | — | [DATA_NEEDED: input hysteresis] |
| Power-On Reset | — | [DATA_NEEDED: power-on reset behavior] |
| I2C Address | — | [DATA_NEEDED: programmable I2C address range] |
| Estado RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |