PCM5102APWR vs PCM5142PWR Comparación
Comparación detallada lado a lado de PCM5102APWR por Texas Instruments y PCM5142PWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
PCM5142PWR - 112dB Stereo Audio DAC | Texas Instruments (Tape & Reel)
PCM5142PWR ✓ ActivoComparación de especificaciones
| Parámetro | PCM5102APWR | PCM5142PWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | ADC/DAC | ADC/DAC |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Stereo Audio DAC | — |
| Resolución | 32-bit | — |
| Dynamic Range | 112 dB | 112 dB |
| THD+N | 100 dB (typical) | — |
| Tensión de salida | 2.1 VRMS (DirectPath) | — |
| Tipo de salida | Ground-centered, cap-free | — |
| Sample Rate | 8 kHz to 384 kHz | — |
| Digital Interface | I2S, LJ, RJ, DSP (PCM) | PCM interface |
| Supply Voltage (DVDD) | 3.3 V | — |
| Integrated PLL | Yes (BCLK-only operation supported) | — |
| Control Interface | Hardware pins / I2C | — |
| Encapsulado | TSSOP-20 (PW) | 28-pin TSSOP (PW) |
| Temperatura de funcionamiento | -25C to +85C | — |
| Tipo de montaje | Surface Mount | Surface mount |
| Nivel MSL | Level-1-260C-UNLIM | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Device Type | — | Stereo audio digital-to-analog converter |
| Maximum PCM Sampling Rate | — | 384 kHz |
| Supported PCM Word Lengths | — | 16 bit, 24 bit, 32 bit |
| Analog Output | — | 2 V RMS |
| Output Architecture | — | DirectPath |
| Digital Signal Processor | — | Fully programmable miniDSP |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Number of Audio Channels | — | 2 channels |
| DC-Blocking Output Capacitors | — | Not required |
| Charge Pump | — | Integrated negative charge pump |
| Configuration Method | — | Software or hardware configuration |
| Digital Filter | — | Selectable latency and performance |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |