SI8715BC-A-IS vs SI8710BC-B-IS Comparación
Comparación detallada lado a lado de SI8715BC-A-IS por Skyworks Solutions y SI8710BC-B-IS por Skyworks Solutions. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Skyworks Solutions
SI8715BC-A-IS - 3.75 kV 1-Ch Digital Isolator 15 Mbps SOIC-8 | Skyworks
SI8715BC-A-IS ✓ ActivoComparación de especificaciones
| Parámetro | SI8715BC-A-IS | SI8710BC-B-IS |
|---|---|---|
| Marca | Skyworks Solutions | Skyworks Solutions |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,41 | $0,95 |
| Isolation Voltage (1 min) | 3750 Vrms | — |
| Isolation Type | Capacitive / RF carrier (LED emulator input) | — |
| Number of Channels | 1 | 1 |
| Directionality | Unidirectional (input to output) | — |
| Maximum Data Rate | 15 Mbps | — |
| Common-Mode Transient Immunity (CMTI) | >50 kV/us (typical) | 35 kV/us (minimum), >50 kV/us (typical) |
| Output Supply Voltage | 2.5 V to 5.5 V | — |
| Propagation Delay (typ.) | 50 ns | — |
| Input Drive | Current-driven emulated LED (external resistor required) | — |
| Encapsulado | 8-SOIC (0.154", 3.90 mm width) | 8-SOIC (0.154 inch, 3.90 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 to +125 C | — |
| Nivel MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Estado RoHS | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes / [DATA_NEEDED: halogen-free status] | — |
| FIT Rate Advantage vs Optocoupler | Approximately 10x lower | — |
| Pin-to-Pin Optocoupler Replacement | Yes (drop-in) | — |
| Función | — | Single-channel digital isolator (LED emulator input, open-collector output) |
| Velocidad de datos | — | 15 Mbps (maximum) |
| Propagation Delay | — | 60 ns (maximum) |
| Isolation Voltage | — | 3750 Vrms |
| Supply Voltage (VDD) | — | 3 V to 30 V |
| Input Type | — | LED emulator (current-driven) |
| Tipo de salida | — | Open-collector |
| Temperatura de funcionamiento | — | -40C to +125C |
| Inputs - Side 1 / Side 2 | — | 1 / 0 |
| Technology | — | CMOS capacitive isolation |