SN65HVD234DR vs SN65HVD230QDRQ1 Comparación
Comparación detallada lado a lado de SN65HVD234DR por Texas Instruments y SN65HVD230QDRQ1 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ ActivoTexas Instruments
SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments
SN65HVD230QDRQ1 ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD234DR | SN65HVD230QDRQ1 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,30 | $1,11 |
| Product Type | CAN Bus Transceiver | — |
| Protocol | ISO 11898-1 CAN 2.0A/B | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Logic Supply Voltage (VIO) | Not required (3.3V logic) | — |
| Maximum Signaling Rate | 1 Mbps | — |
| Number of Drivers/Receivers | 1/1 | — |
| Bus Fault Protection | +/-36 V | — |
| ESD Protection (Bus Pins, HBM) | >16 kV | — |
| Common-Mode Input Range | +/-12 V (extended) | — |
| Maximum Nodes Supported | 120 | — |
| I/O Logic Level | LVTTL, 5V-tolerant | — |
| Sleep Mode Supply Current | 0.05 uA (typical) | — |
| Standby Mode Supply Current | 370 uA (typical) | — |
| Rango de temperatura de funcionamiento | -40C to +125C | -40C to +125C |
| Encapsulado | SOIC-8 (D) | 8-SOIC (D), 3.90 mm width |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | — |
| Modes of Operation (RS Pin) | High-speed, Slope Control, Low-power Standby | — |
| Dominant Time-Out Protection | Yes | — |
| Apagado térmico | Yes | — |
| Transceiver Type | — | CAN (Half-duplex, 1 driver / 1 receiver) |
| Velocidad de datos | — | Up to 1 Mbps |
| Tensión de alimentación | — | 3.3 V |
| Standby Mode Current | — | 370 uA (typical) |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Device ESD Rating | — | Exceeds 2000 V per MIL-STD-883 |
| Protocol Compatibility | — | ISO 11898-2 High Speed CAN Physical Layer |
| Standby Mode | — | Yes (RS pin controlled) |
| Dominant Timeout | — | Yes |
| Slew Rate Control | — | Yes (RS pin) |
| Unpowered Node Behavior | — | Does not disturb the bus |
| AEC-Q100 Qualification | — | Qualified (Automotive Catalog) |
| Packaging | — | Tape & Reel (DR) |