SN65HVD37D vs MAX3483ESA+ Comparación
Comparación detallada lado a lado de SN65HVD37D por Texas Instruments y MAX3483ESA+ por Maxim Integrated. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ Activo
Comparación de especificaciones
| Parámetro | SN65HVD37D | MAX3483ESA+ |
|---|---|---|
| Marca | Texas Instruments | Maxim Integrated |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | Transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 3.6 V (nominal 3.3 V) | — |
| Signaling Rate | Up to 25 Mbps | — |
| Receiver Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Bus-Pin ESD Protection (HBM) | >15 kV HBM | — |
| Receiver Hysteresis | 60 mV (typical) | — |
| Quiescent Current (active) | 1 mA (typical) | — |
| Standby / Shutdown Current | <1 uA (typical) | — |
| Temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | 14-SOIC (D), 0.154" / 3.90 mm width | 8-SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| RoHS / Lead-Free | RoHS compliant, lead-free (per TI product page) | — |
| Fail-Safe Receiver | Yes (idle/open/short safe) | — |
| Driver / Receiver Enable | Independent DE and RE pins | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Tensión de alimentación | — | 3.3 V |
| Verified Supply Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Interface Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| EMI Control | — | Slew-rate limitation reduces EMI and reflections |
| Low-Speed Error-Free Transmission | — | Up to 250 kbps |
| Power Architecture | — | 3.3V-powered, low-power transceiver |
| Operating Voltage | — | 3 V to 3.6 V |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| Receiver Output Type | — | [DATA_NEEDED: receiver output type] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing details] |
| Estado RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |