SN65HVD51D vs SN65HVD50D Comparación
Comparación detallada lado a lado de SN65HVD51D por Texas Instruments y SN65HVD50D por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ ActivoTexas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD51D | SN65HVD50D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-422/RS-485 full-duplex transceiver | High-output full-duplex RS-485 driver and receiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Signaling Rate | 5 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Interface Standards | RS-422 and RS-485 | — |
| Duplex Mode | Full-duplex | — |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | 256 nodes |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 15 kV HBM |
| Available Driver Transition Rates | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Standby Current | Less than 1 µA | 1 µA |
| Rango de temperatura de funcionamiento | -40 °C to 85 °C | -40 °C to +85 °C |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width |
| Tipo de montaje | Surface mount | Surface mount |
| Enable Architecture | Fully enabled; no external enable pins | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Supported Standards | — | RS-485 and RS-422 |
| Maximum Data Rate | — | 25 Mbps |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Receiver Hysteresis | — | 50 mV |
| Unit Load | — | 1/8 unit load |
| Driver Transition-Time Options | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict Minerals | — | [DATA_NEEDED: conflict-minerals status] |
| Manufacturer Product Description | — | High Output Full-Duplex RS 485 Drivers and Receivers |