SN74CBTLV1G125DBVR vs SN74LVC1G125DBVR Comparación
Comparación detallada lado a lado de SN74CBTLV1G125DBVR por Texas Instruments y SN74LVC1G125DBVR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN74CBTLV1G125DBVR - 3.3V Single FET Bus Switch SOT-23-5 | TI
SN74CBTLV1G125DBVR ✓ ActivoTexas Instruments
SN74LVC1G125DBVR - 1.65-5.5V 3-State Buffer Gate | TI | SOT-23-5
SN74LVC1G125DBVR ✓ ActivoComparación de especificaciones
| Parámetro | SN74CBTLV1G125DBVR | SN74LVC1G125DBVR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Logic ICs | Logic ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,18 | $0,13 |
| Función | Bus Switch - 1:1 (SPST), 1-channel | Single non-inverting buffer / line driver |
| Topología | 1 x SPST-NC | — |
| On-State Resistance (ron) | 5 ohm (typ) at VCC = 3.3 V | — |
| Supply Voltage (VCC) | 2.3 V to 3.6 V | 1.65 V to 5.5 V |
| Rango de tensión de entrada | 0 V to 5.5 V tolerant | — |
| Propagation Delay (tpd) | [DATA_NEEDED: typical tpd in ns] | Specified at 3.3 V (see datasheet) |
| Quiescent Current (ICC) | 10 uA (max) | — |
| Output Enable (OE) Input | Active-low (OE-bar) | — |
| Ioff Partial-Power-Down | Supported | — |
| Temperatura de funcionamiento | -40C to +85C | -40C to +125C |
| Encapsulado | SOT-23-5 (DBV) 2.9 x 1.6 mm | SOT-23-5 (DBV) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Recuento de pines | 5 | — |
| Nivel MSL | 1 (unlimited floor life) | 1 (260C, unlimited) |
| Estado RoHS | Compliant | ROHS3 Compliant |
| Logic Family | — | LVC (Low-Voltage CMOS) |
| Number of Elements | — | 1 |
| Bits per Element | — | 1 |
| Tipo de salida | — | 3-State |
| Input Voltage Tolerance | — | Up to 5.5 V (independent of VCC) |
| Maximum Quiescent Current (ICC) | — | 10 uA |
| Output Drive (IOUT) | — | +/-24 mA at 3.3 V |
| Output Enable | — | Active-low OE (high = Hi-Z) |
| Ioff / Partial-Power-Down | — | Supported |