SN75176BD vs SP485BN-L Comparación
Comparación detallada lado a lado de SN75176BD por Texas Instruments y SP485BN-L por Sipex. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SN75176BD | SP485BN-L |
|---|---|---|
| Marca | Texas Instruments | Sipex |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Differential bus transceiver | Half-duplex RS-485/RS-422 transceiver |
| Tensión de alimentación | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Rango de temperatura de funcionamiento | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | SOIC (D), 8 pins | 8-pin SOIC |
| Tipo de montaje | Surface mount | [DATA_NEEDED: mounting type] |
| Recuento de pines | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | RoHS listed in distributor product reference |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Velocidad de datos | — | Up to 5 Mbps |
| Interface Standards | — | RS-485 and RS-422 |
| Architecture | — | BiCMOS |
| Receiver Unit Load | — | 1/10 unit load |
| Duplex Mode | — | Half-duplex |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Enable Control | — | [DATA_NEEDED: DE control electrical specification] |
| Receiver Enable Control | — | [DATA_NEEDED: /RE control electrical specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |