SP3232EEN-L vs SP232ECT-L Comparación
Comparación detallada lado a lado de SP3232EEN-L por MaxLinear y SP232ECT-L por MaxLinear. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SP3232EEN-L | SP232ECT-L |
|---|---|---|
| Marca | MaxLinear | MaxLinear |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Transceiver Type | 2/2 transceiver, full RS-232 | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Maximum Data Rate | 120 kbps | [DATA_NEEDED: maximum data rate] |
| Tensión de alimentación de funcionamiento | 3 V to 5.5 V | — |
| Nominal Supply Current | 1 mA | — |
| Corriente de apagado | 1 µA | — |
| Temperatura de funcionamiento | -40°C to +85°C | 0 C to +70 C |
| Encapsulado | 16-pin SOIC | 16-SOIC (SOIC16W) |
| Tipo de montaje | Surface mount | Surface Mount |
| RS-232 Standard | True EIA/TIA-232-F operation | — |
| Charge-Pump Capacitor Value | 0.1 µF in 3.3 V operation | — |
| System ESD Rating | ±15 kV IEC 61000-4-2 and ±15 kV HBM | — |
| Receiver Status During Shutdown | Active for the SP3222E/SP3232E series | — |
| Power-Supply Topology | Single-supply charge-pump RS-232 interface | — |
| Estado RoHS | unknown | — |
| Lead-Free Status | unknown | — |
| Automotive Qualification | not_qualified | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| ESD Protection | — | +/-15 kV |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |