SP3232EET-L vs SP232ECT-L Comparación
Comparación detallada lado a lado de SP3232EET-L por MaxLinear y SP232ECT-L por MaxLinear. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SP3232EET-L | SP232ECT-L |
|---|---|---|
| Marca | MaxLinear | MaxLinear |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Unknown | Activo |
| Product Type | RS-232 transceiver | — |
| Transceiver Configuration | 2 transmit / 2 receive channels | — |
| Supply Voltage Range | +3.0 V to +5.5 V | 4.5 V to 5.5 V |
| Velocidad de datos | 120 kbps | — |
| Corriente de alimentación | 1 mA | — |
| Temperatura de funcionamiento | -40 C to +85 C | 0 C to +70 C |
| Encapsulado | 16-SOIC | 16-SOIC (SOIC16W) |
| Interface Standard | RS-232 / EIA/TIA-232-F | — |
| Charge-Pump Capacitor Requirement | 0.1 uF in 3.3 V operation | — |
| Shutdown Supply Current | 1 uA with receivers active | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Tipo de montaje | Surface mount | Surface Mount |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| ESD Protection | — | +/-15 kV |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |