STM32F105VCT6 vs STM32F107VCT6 Comparación
Comparación detallada lado a lado de STM32F105VCT6 por Desconocido y STM32F107VCT6 por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ ActivoComparación de especificaciones
| Parámetro | STM32F105VCT6 | STM32F107VCT6 |
|---|---|---|
| Marca | — | STMicroelectronics |
| Categoría | — | Microcontrollers |
| Estado del ciclo de vida | Activo | |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $5,40 | $6,95 |
| Core Architecture | ARM Cortex-M3 (32-bit) | ARM Cortex-M3 32-bit RISC |
| Core Max Frequency | 72 MHz | — |
| Program Memory (Flash) | 256 KB | — |
| SRAM | 64 KB | 64 KB |
| Operating Voltage (VDD) | 2.0 V to 3.6 V | — |
| Encapsulado | LQFP-100 (14x14 mm) | 100-pin LQFP (14x14 mm) |
| Temperatura de funcionamiento | -40 C to +85 C | — |
| GPIO Count | 80+ | — |
| USB | USB 2.0 Full-Speed OTG with on-chip PHY | — |
| CAN | 2x CAN 2.0B active | — |
| Ethernet | 10/100 MAC (MII/RMII) - external PHY required | — |
| USART/UART | 5 channels | — |
| SPI | 3 channels | 3 SPIs |
| I2C | 2 channels | 2 I2Cs |
| ADC | 2x 12-bit, 1 Msps, 16 channels | 2 x 12-bit, up to 16 channels |
| DAC | 1x 12-bit | — |
| Timers | Advanced-control, general-purpose, basic, SysTick, watchdog | 10 timers (general-purpose + PWM) |
| FSMC | Yes - external memory/display bus | — |
| DMA | 12 channels | — |
| Estado RoHS | Compliant | Compliant |
| Frecuencia de reloj máxima | — | 72 MHz |
| Flash Memory | — | 256 KB (256K x 8) |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Rango de temperatura de funcionamiento | — | -40 C to +85 C |
| Tipo de montaje | — | Surface Mount |
| Ethernet MAC | — | 10/100 Mbps with dedicated DMA |
| USB Interface | — | USB 2.0 OTG full-speed (on-chip PHY) |
| CAN Controllers | — | 2 x CAN 2.0B |
| USART / UART | — | 5 USARTs |
| Debug Interface | — | JTAG and SWD |
| Low-Power Modes | — | Sleep, Stop, Standby |
| Nivel MSL | — | [DATA_NEEDED: MSL level] |