STM32F427VIT6 vs STM32F427IIT6 Comparación
Comparación detallada lado a lado de STM32F427VIT6 por STMicroelectronics y STM32F427IIT6 por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
STM32F427VIT6 - 180MHz Cortex-M4 MCU 2MB Flash LQFP-100 | ST
STM32F427VIT6 ✓ ActivoSTMicroelectronics
STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics
STM32F427IIT6 ✓ ActivoComparación de especificaciones
| Parámetro | STM32F427VIT6 | STM32F427IIT6 |
|---|---|---|
| Marca | STMicroelectronics | STMicroelectronics |
| Categoría | Microcontrollers | Microcontrollers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $10,50 | $11,20 |
| Core Architecture | ARM Cortex-M4 with single-precision FPU | ARM Cortex-M4 with FPU and DSP instructions |
| Frecuencia de reloj máxima | 180 MHz | — |
| Performance | 225 DMIPS / 3.92 CoreMark/MHz (Dhrystone 2.1) | — |
| DSP Instructions | Full ARM DSP instruction set | — |
| Flash Memory | 2 MB (2M x 8) | 2 MB |
| SRAM | 256 KB | 256 KB (plus 4 KB backup SRAM) |
| Encapsulado | LQFP-100 (14 x 14 mm, 0.5 mm pitch) | 176-pin LQFP (24 x 24 mm, 0.5 mm pitch) |
| GPIO Pins | 82 | — |
| Operating Voltage (VDD) | 1.8 V to 3.6 V | — |
| Temperatura de funcionamiento | -40 C to +85 C (industrial grade, VIT6 suffix) | — |
| ADC | 3 x 12-bit, up to 2.4 MSPS | 3 x 12-bit, 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| Communication Interfaces | 3 x USART/UART, 4 x SPI, 3 x I2C, 2 x CAN 2.0B, USB OTG FS + HS, Ethernet MAC, SDIO | — |
| ART Accelerator | Yes - 0-wait-state Flash execution | Yes (0-wait-state Flash execution) |
| Cryptographic Accelerator | AES, DES, SHA, HMAC, TRNG | — |
| Chrom-ART Accelerator | Yes - 2D graphics DMA | — |
| TFT-LCD Controller | Yes (parallel RGB interface) | — |
| Tipo de montaje | Surface Mount (SMD/SMT) | Surface Mount (LQFP-176) |
| Estado RoHS | Compliant | Compliant |
| Maximum CPU Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Rango de temperatura de funcionamiento | — | -40C to +85C (industrial grade) |
| USB | — | USB 2.0 OTG FS + USB 2.0 OTG HS (with on-chip PHY) |
| Ethernet | — | 10/100 MAC with IEEE 1588v2 hardware time-stamping |
| Timers | — | Up to 17 (including motor-control timers) |
| Communication Peripherals | — | UART/USART, SPI, I2C, CAN 2.0B, SAI, SDMMC |
| Graphics Accelerator | — | Chrom-ART (for TFT LCD) |