TCA9535DBT vs TCA9535PWR Comparación
Comparación detallada lado a lado de TCA9535DBT por Texas Instruments y TCA9535PWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TCA9535DBT | TCA9535PWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | 16-bit I2C/SMBus low-power I/O expander | — |
| Number of I/O Lines | 16 lines | — |
| Operating Supply Voltage Range | 1.65 V to 5.5 V | — |
| Maximum I2C/SMBus Clock Frequency | 400 kHz | — |
| Number of Ports | 4 eight-bit ports | 2 ports of 8 bits |
| Interrupt Output | Yes | 1 interrupt output |
| Configuration Registers | Yes | 2 configuration registers |
| Hardware Address Inputs | 3 | — |
| Serial Interface | I2C and SMBus | — |
| Recuento de pines | 24 pins | — |
| Encapsulado | 24-pin SSOP | 24-pin TSSOP (PW) |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Tipo de montaje | Surface mount | Surface mount |
| I/O Direction Control | Independent input or output configuration | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Output High and Low Current | [DATA_NEEDED: output drive current] | — |
| Standby Current | [DATA_NEEDED: standby current] | — |
| ESD Rating | [DATA_NEEDED: human-body-model ESD rating] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | 16-bit I2C/SMBus I/O expander |
| Number of I/O Pins | — | 16 pins |
| Tensión de alimentación de funcionamiento | — | 1.65 V to 5.5 V |
| Serial Bus | — | I2C and SMBus |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Interface Pins | — | 2-wire bidirectional bus |
| Polarity Inversion Registers | — | 2 polarity-inversion registers |
| Input Configuration | — | High-impedance input mode |
| Configuración de salida | — | Independently configurable per port bit |
| Output Current per Pin | — | [DATA_NEEDED: output current per pin] |
| I2C Slave Address | — | [DATA_NEEDED: I2C slave address] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |