THVD1552DR vs THVD1552DGS Comparación
Comparación detallada lado a lado de THVD1552DR por Texas Instruments y THVD1552DGS por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | THVD1552DR | THVD1552DGS |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,15 | $1,85 |
| Type | Transceiver | — |
| Protocol | RS-485 / RS-422 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | Full |
| Supply Voltage (VCC) | 3 V to 5.5 V | 4.5 V to 5.5 V |
| Signaling Rate (max) | 50 Mbps | 50 Mbps |
| Bus-Pin ESD Protection (HBM) | ±18 kV (IEC 61000-4-2 contact/air) | — |
| IEC EFT Immunity | ±4 kV (IEC 61000-4-4 fast transient) | — |
| Receiver Fail-Safe | Yes (open, short, idle bus to logic-high) | — |
| Unit Load | 1/8 unit load (up to 256 nodes per bus) | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | — |
| Encapsulado | 14-SOIC (D), 3.90 mm width | 10-pin VSSOP (DGS), 3.00 mm width |
| Tipo de montaje | Surface Mount | Surface Mount (SMD/SMT) |
| Nivel MSL | MSL1-260C-UNLIM (per PartGenie) | — |
| Estado RoHS | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes (TI product page) | — |
| Product Type | — | RS-485 / RS-422 Transceiver |
| Number of Drivers / Receivers | — | 1 / 1 |
| HBM ESD (bus pins) | — | ±30 kV |
| IEC 61000-4-2 ESD, Contact Discharge | — | ±18 kV |
| IEC 61000-4-2 ESD, Air-Gap Discharge | — | ±25 kV |
| Temperatura de funcionamiento | — | -40 °C to +125 °C |
| Standards Compliance | — | TIA/EIA-485A |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode range from datasheet] |
| Receiver Fail-safe | — | Yes (idle/short/open bus) |