TLD2314ELXUMA1 vs TLD1211SJFUMA1 Comparación
Comparación detallada lado a lado de TLD2314ELXUMA1 por Infineon y TLD1211SJFUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TLD2314ELXUMA1 | TLD1211SJFUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | LED Drivers | LED Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,58 | $0,33 |
| Product Type | Linear LED Constant Current Driver | Linear LED Driver IC |
| Topología | High-Side Linear Current Source | Linear Constant-Current |
| Number of Output Channels | 3 | — |
| Maximum Output Current per Channel | 120 mA | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| LED Current Setting | External sense resistor on SET pin | — |
| Dimming Method | Linear (analog) via SET, PWM via ENABLE | — |
| Dropout (Headroom) Voltage | 0.5 V typical at 100 mA | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C | -40 C to +150 C (junction) |
| Encapsulado | PG-SSOP-14-5 (exposed pad, 14-lead) | PG-DSO-8-16 (8-pin, exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Diagnostic Outputs | Open-LED, short-to-GND, over-temperature | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Estado RoHS | Compliant | Compliant |
| Nivel MSL | MSL3 | — |
| Family | LITIX Basic | — |
| Número de salidas | — | 1 |
| Corriente de salida máxima | — | 85 mA |
| Supply Voltage Range (Vs) | — | 5.5 V to 28 V |
| Load-Dump Tolerance | — | 40 V |
| Dimming Interface | — | PWM via EN pin (CMOS/TTL) |
| EN High-Level Voltage (V_EN,ON) | — | 1 V to 5.5 V |
| EN Low-Level Voltage (V_EN,OFF) | — | -0.3 V to 0.3 V |
| EN Input Current (I_EN) | — | 60 to 130 uA (V_EN = 5 V) |
| Sense Voltage (Vsense) | — | Programmed by external resistor |
| Drop Voltage (Vs - Vout) | — | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) |
| Automotive Qualification | — | AEC-Q100 targeted (Automotive Grade) |