TLV2760ID vs TLV2760CD Comparación
Comparación detallada lado a lado de TLV2760ID por Texas Instruments y TLV2760CD por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
TLV2760ID - 500kHz RRIO Op Amp with Shutdown | Texas Instruments
TLV2760ID ✓ ActivoTexas Instruments
TLV2760CD - 3.6V, 500kHz Micropower RRIO Op Amp with Shutdown | Texas Instruments
TLV2760CD ✓ ActivoComparación de especificaciones
| Parámetro | TLV2760ID | TLV2760CD |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | 1 circuit operational amplifier | General Purpose Operational Amplifier, Rail-to-Rail Input/Output |
| Maximum Recommended Supply Voltage | 3.6 V | 3.6 V |
| Minimum Operating Supply Voltage | 1.8 V | — |
| Gain-Bandwidth Product | 500 kHz | 500 kHz |
| Typical Supply Current | 20 µA | — |
| Input Offset Voltage | 3500 µV typical | — |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail (includes both supply rails) |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Shutdown Function | 1 shutdown control function | — |
| Rango de temperatura de funcionamiento | -40°C to +85°C | 0 °C to 70 °C |
| Encapsulado | 8-pin SOIC | 8-SOIC (0.154 in, 3.90 mm width) |
| Tipo de montaje | Surface mount | Surface Mount |
| Supply Voltage Characterization | Single supply operation | — |
| Noise Type | [DATA_NEEDED: input voltage noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: output current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Channels | — | 1 |
| Supply Voltage Range | — | 1.8 V to 3.6 V |
| Quiescent Current (Typ) | — | 20 µA per amplifier |
| Input Offset Voltage (Typ) | — | 3.5 mV |
| Input Bias Current (Typ) | — | 3 pA |
| Shutdown Pin | — | Yes |
| Technology | — | CMOS |
| Supply Current with Shutdown | — | [DATA_NEEDED: shutdown supply current] |
| Input Offset Voltage Temperature Drift | — | [DATA_NEEDED: input offset voltage drift] |