TMP816PWR vs DRV8816PWP Comparación
Comparación detallada lado a lado de TMP816PWR por Texas Instruments y DRV8816PWP por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
DRV8816PWP - 40V Dual Half-H Bridge Motor Driver | Texas Instruments
DRV8816PWP ✓ ActivoComparación de especificaciones
| Parámetro | TMP816PWR | DRV8816PWP |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,39 | $1,82 |
| Topología | Single-phase full-wave BLDC fan predriver | — |
| Supply Voltage (VCC) | 6 V to 16 V | — |
| Maximum Supply Voltage | 18 V | — |
| Load Voltage | 10 V | — |
| Output Current | 20 mA (gate drive to external PNP+NMOS) | — |
| Número de salidas | 1 (pre-driver output pair) | — |
| Current Limit Threshold | Adjustable (external resistor) | — |
| Rango de temperatura de funcionamiento | -30 °C to +95 °C | — |
| Control Input | PWM speed command | — |
| Tachometer Output | FG (frequency-generator) signal | — |
| External Power Stage | PNP + N-channel MOSFET pair | — |
| Protection Features | Thermal shutdown, adjustable current limit, lock-rotor protection | UVLO, thermal shutdown, shoot-through protection, fault flag |
| Encapsulado | 20-pin TSSOP (PW), 4.40 mm width | HTSSOP-16 (PWP) with PowerPAD |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 1 (unlimited floor life at <30 °C / 85 % RH) | 2 |
| Estado RoHS | Compliant | Compliant |
| Lead-Free | Yes | Yes |
| Drive Method | Full-wave, sensored (Hall-element input) | — |
| Motor Driver Architecture | — | Dual 1/2-H Bridge (two independent half bridges) |
| Supply Voltage (VM) | — | 8 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Output Current per Channel | — | 2.8 A peak (per half bridge) |
| On-Resistance (HS + LS per output) | — | [DATA_NEEDED: RDSon per MOSFET] |
| Logic Input Voltage (VDD) | — | 3.3 V / 5 V compatible |
| Interfaz | — | Parallel (INx / ENx per half bridge) |
| PWM Frequency | — | Up to 200 kHz |
| Current Sense | — | Integrated (external Rsense) |
| Temperatura de funcionamiento | — | -40 C to +85 C |
| Thermal Resistance (theta_JA) | — | [DATA_NEEDED: theta_JA from datasheet] |