TPS23881ARTQT vs TPS23881RTQR Comparación

Comparación detallada lado a lado de TPS23881ARTQT por Texas Instruments y TPS23881RTQR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Texas Instruments
TPS23881ARTQT TPS23881ARTQT - 8-Ch 4-Pair Type-4 PoE PSE | Texas Instruments

TPS23881ARTQT - 8-Ch 4-Pair Type-4 PoE PSE | Texas Instruments

TPS23881ARTQT ✓ Activo
Texas Instruments
TPS23881RTQR TPS23881RTQR - 8-Ch 802.3bt PoE PSE Controller | Texas Instruments

TPS23881RTQR - 8-Ch 802.3bt PoE PSE Controller | Texas Instruments

TPS23881RTQR ✓ Activo

Comparación de especificaciones

Parámetro TPS23881ARTQT TPS23881RTQR
Marca Texas Instruments Texas Instruments
Categoría Power MOSFET Drivers Power MOSFET Drivers
Estado del ciclo de vida Activo Activo
Estado del stock In Stock In Stock
Precio unitario (USD) $5,30 $6,05
Number of Channels 8 8 independent PSE channels
PoE Standard IEEE 802.3bt Type-3 / Type-4, 802.3at (PoE+) —
Number of Powered Pairs 4-pair —
Sense Resistor 200 mΩ —
Supply Voltage (VCC) 44 V to 57 V (nominal 48 V) —
Maximum Per-Port Power 90 W (Type-4) —
Control Interface I2C (16 selectable addresses) —
Modes Autonomous / Semi-Auto / Manual —
Current Limit Foldback Yes (per-port) —
Thermal Protection Yes (per-port thermal shutdown) —
Temperatura de funcionamiento -40 °C to +125 °C -40 C to +85 C
Encapsulado 56-pin VQFN (8x8 mm) VQFN-56 (RTQ) 8x8 mm with exposed thermal pad
Tipo de montaje Surface Mount Surface Mount
Nivel MSL 3 (168 hours) Level-3, 260 C, 168 hr (per JEDEC J-STD-020)
Estado RoHS Compliant RoHS Compliant
Product Type — PoE PSE Controller (Power Sourcing Equipment)
Standard Compliance — IEEE 802.3bt (Type 3 / Type 4), backwards compatible with 802.3at / 802.3af
Configuration — 2-Pair or 4-Pair, auto-mode or semi-auto-mode
Maximum Power per Port — 90 W (Type-4, 4-Pair)
Current Sense Resistor — 200 mΩ RSENSE (external)
Rango de tensión de entrada — 44 V to 57 V (typical 54 V PoE bus)
Host Interface — I2C (primary), SPI (configuration)
Integrated Hot-Swap FET — Yes, per channel (low-side)
REACH Status — [DATA_NEEDED: REACH compliance statement]
Telemetry — Per-port V/I readback via 12-bit ADC
Firmware Support — Compatible with TI FirmPSE system firmware (multi-device up to 48 ports)

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización