TPS23882RTQR vs TPS23881RTQR Comparación
Comparación detallada lado a lado de TPS23882RTQR por Texas Instruments y TPS23881RTQR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
TPS23881RTQR - 8-Ch 802.3bt PoE PSE Controller | Texas Instruments
TPS23881RTQR ✓ ActivoComparación de especificaciones
| Parámetro | TPS23882RTQR | TPS23881RTQR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | LED Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,09 | $6,05 |
| Función | PoE PSE Controller (Power Sourcing Equipment) | — |
| Number of Channels | 8 | 8 independent PSE channels |
| Standards Supported | IEEE 802.3bt, IEEE 802.3at (PoE+), IEEE 802.3af (PoE) | — |
| PoE Type | Type-3, 2-pair | — |
| Max Power per Port | 30 W (2-pair, Type-3) | — |
| Integrated Sense Resistor | 200 mOhm (on-chip RSENSE) | — |
| Embedded Memory | SRAM (programmable detection/classification) | — |
| Pin Compatibility | TPS2388, TPS23880, TPS23881 (pin-to-pin, port remapping) | — |
| Encapsulado | 56-QFN (8x8 mm), RTQ suffix | VQFN-56 (RTQ) 8x8 mm with exposed thermal pad |
| Rango de temperatura de funcionamiento | -40C to +125C | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (R suffix), Cut Tape (T suffix) | — |
| Part Status | Active | — |
| Estado RoHS | Compliant | RoHS Compliant |
| Categoría | PMIC - Power over Ethernet (PoE) Controllers | — |
| Tensión de alimentación | [DATA_NEEDED: supply voltage range] | — |
| MSL Rating | [DATA_NEEDED: moisture sensitivity level] | — |
| Product Type | — | PoE PSE Controller (Power Sourcing Equipment) |
| Standard Compliance | — | IEEE 802.3bt (Type 3 / Type 4), backwards compatible with 802.3at / 802.3af |
| Configuration | — | 2-Pair or 4-Pair, auto-mode or semi-auto-mode |
| Maximum Power per Port | — | 90 W (Type-4, 4-Pair) |
| Current Sense Resistor | — | 200 mΩ RSENSE (external) |
| Rango de tensión de entrada | — | 44 V to 57 V (typical 54 V PoE bus) |
| Temperatura de funcionamiento | — | -40 C to +85 C |
| Host Interface | — | I2C (primary), SPI (configuration) |
| Integrated Hot-Swap FET | — | Yes, per channel (low-side) |
| Nivel MSL | — | Level-3, 260 C, 168 hr (per JEDEC J-STD-020) |
| REACH Status | — | [DATA_NEEDED: REACH compliance statement] |
| Telemetry | — | Per-port V/I readback via 12-bit ADC |
| Firmware Support | — | Compatible with TI FirmPSE system firmware (multi-device up to 48 ports) |