TUSB320HAIRWBR vs STUSB4500QTR Comparación
Comparación detallada lado a lado de TUSB320HAIRWBR por Texas Instruments y STUSB4500QTR por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ ActivoComparación de especificaciones
| Parámetro | TUSB320HAIRWBR | STUSB4500QTR |
|---|---|---|
| Marca | Texas Instruments | STMicroelectronics |
| Categoría | USB Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,91 | $0,74 |
| Función | USB Type-C Configuration Channel Logic and Port Control | — |
| USB Specification | USB Type-C 1.1 (backward compatible to 1.0) | — |
| Supply Voltage (VCC) | 3.3 V (typical); see datasheet for range | — |
| Supported Current Advertisement | Default USB / 1.5 A / 3 A | — |
| Port Roles Supported | DFP (Source), UFP (Sink), DRP (Dual Role) | — |
| Mode Configuration | Hardware (MODE pins); no firmware required | — |
| Enable Input (EN) | Active-high | — |
| CC Pin ESD Protection | HBM rated (per datasheet) | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C (Industrial) | -40 C to +105 C |
| Encapsulado | X2QFN-12 (RWB), 1.6 mm x 1.6 mm | 24-QFN (4x4 mm) with exposed pad |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 1 (per TI packaging info) | 3 (168 hours) |
| Estado RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Integrated CC Pull-Up Resistor | 5.1 kOhm (typ) per Type-C spec | — |
| Cable Orientation Detection | Yes (CC1/CC2) | — |
| Product Type | — | Standalone USB Type-C PD Sink Controller |
| USB Standard | — | USB Type-C R2.1, USB Power Delivery R3.0 |
| USB Speed | — | USB 1.2 / USB 2.0 (no USB 3.x data) |
| Maximum PD Power | — | 100 W (20 V / 5 A) |
| Supported PDO Voltages | — | 5 V / 9 V / 12 V / 15 V / 20 V |
| Role | — | Sink (UFP) only |
| Host Interface | — | I2C (Fast-mode 400 kHz) |
| CC Pin VBUS Short Protection | — | Up to 22 V on CC1, CC2, VCONN- |
| Integrated NVM | — | Yes (PDO profile configuration) |
| Dead Battery Support | — | Yes |
| Auto-Run Mode | — | Yes (MCU-less negotiation) |
| VCONN Source | — | No (sink only, no VCONN supply) |
| GPIO Pins | — | 2 (configurable) |
| Supply Voltage (VBUS to VCC internal LDO) | — | Up to 22 V tolerance |
| USB-IF Certification | — | Yes (TID 1074413) |